samfurin

Wakilin Yankin Silinda na Silinda SILIA2008

Short Short:

SILIA-2008 Noma shimfidar silicone na Noma da Wakilin Wanka
Gidaje
Bayyanar launuka : Mara launi zuwa maraƙin amber
Sonko (25 ℃ , mm2 / s) : 25-50
Tashin hankali na kwance (25 ℃ , 0.1% , mN / m) : <20.5
Girma (25 ℃) : 1.01 ~ 1.03g / cm3
Matsakaicin girgije (1% wt , ℃) : <10 ℃


Cikakken kayan Kayan aiki

Tambaya

Alamar Samfura

SILIA-2008 Yankakken silicone na yadu da kayan aikin Wanka
ingantaccen tyeloxane na polyether da wani nau'in silicone surfactant tare da babban ikon yadawa da shiga ciki. Yakan sanya tashin hankali saman ruwa zuwa kasa zuwa 20.5mN / m a maida hankali akan 0.1% (wt.). Bayan cakuda tare da maganin kashe kwari a takamaiman gwargwado, zai iya rage malaikan lambar tsakanin fesawa da ciyawar, wanda hakan na iya kara girman murhun. SILIA-2008 na iya sanya shan maganin kashe kwari
ta hanyar kumatu na ganye, wanda yake matuƙar tasiri don inganta inganci, rage adadin magungunan kashe ƙwari, adana farashi, rage gurɓataccen muhalli da ke haifar da magungunan kashe ƙwari
Halaye
 Super yada da kuma shiga wakili
 Don rage sarkar mai amfani da feshin abinci na gona
Don haɓaka haɓakar aikin gona na zamani (haƙuri zuwa ruwan sama)
Ban-banci
Gidaje
Bayyanar launuka : Mara launi zuwa maraƙin amber
Sonko (25 ℃ , mm2 / s) : 25-50
Tashin hankali na kwance (25 ℃ , 0.1% , mN / m) : <20.5
Girma (25 ℃) : 1.01 ~ 1.03g / cm3
Matsakaicin girgije (1% wt , ℃) : <10 ℃

Aikace-aikace
1. ana iya amfani dashi azaman mai amfani da SPRAY: SILIA-2008 na iya ƙara ɗaukar hoto na wakilin spraying, da inganta haɓakawa da rage sashi na wakilin spraying. SILIA-2008 ita ce mafi inganci lokacin da ake haɗuwa da ruwa
(i) a tsakanin kewayon PH na 6-8,
(ii) shirya ruwan cakuda don amfani dashi kai tsaye ko cikin shiri na 24h.
2. ana iya amfani dashi a cikin kayan abinci: SILIA-2008 za'a iya ƙara shi cikin maganin kashe ƙwayoyin cuta na asali.

Hanyar aikace-aikacen :
1) Amfani da SPRAY gauraya a cikin durƙushe
Gabaɗaya, ƙara SILIA-2008 (sau 4000) 5g a cikin kowane 20kg fesa. Idan yana buƙatar inganta adsorption na tsarin kashe kashe magungunan kashe kwari, ƙara yawan aikin kashe magungunan ƙwayoyin cuta ko rage adadin fesawa gaba, yakamata ya ƙara adadin amfani. Gabaɗaya, adadin shine kamar haka:
Shuka mai haɓaka mai shuka: 0.025% ~ 0.05%
Kwayar maganin kashe jini: 0.025% ~ 0.15%
Maganin kashe qwari: 0.025% ~ 0.1%
Kwayar cuta: 0.015% ~ 0.05%
Takin mai magani da kuma alamar alama: 0.015 ~ 0.1%
Lokacin amfani da, da farko kashe da maganin kashe kwari, ƙara SILIA-2008 bayan ruwan cakuda ruwan 80%, sannan ƙara ruwa zuwa 100% kuma haɗa su daidai. Ana ba da shawara cewa lokacin amfani da yaduwar aikin gona na silicone da Penetrating Agent, adadin ruwan ya koma 1/2 na al'ada (da aka ba da shawara) ko 2/3, matsakaiciyar maganin kashe ƙwari ya ragu zuwa 70-80% na al'ada. Yin amfani da aan ƙaramin jijiyoyin hancin ruwa zai hanzarta hanzarta fesawa.

2) Amfani da maganin kashe qwari na asali
Lokacin da samfurin ya haɗu da maganin ƙwaro na asali, muna ba da shawarar adadin shine 0,5% -8% na maganin ƙura na asali. Daidaita darajar PH na maganin kashe maganin kashe kwayoyin cuta zuwa 6-8. Mai amfani yakamata ya daidaita adadin aikin Nesawar Silicone na yaduwar Tsin Gona da Penetrating Agent bisa ga nau'ikan magungunan kashe qwari da kuma takaddara don isa ga mafi inganci kuma mafi tasiri na tattalin arziƙi. Yi gwajin karfin jituwa da gwajin tafiya daidai kafin amfani ..


  • Na baya:
  • Na gaba:

  • Rubuta sakon ka anan ka tura mana